AirSpiral™ tube for less condensate*

The AirSpiral tube produces up to 93% less condensate* than a previous Airvo™ tube.
     

*When compared with Airvo tube 900PT501 in internal F&P testing

Facebook LinkedIn YouTube Twitter
              

We’ve all seen it happen before. When warm, humid gas touches anything even a fraction of a degree colder than itself (i.e. dew point), it cools and generates condensate. We see it often in conventional breathing tubes made of thin, dense plastic: their surfaces are easily cooled by the outside air, resulting in unpleasant “rain-out”.

The AirSpiral heated breathing tube for Airvo 2 utilizes an advanced two-spiral design to help
protect against condensate. 

 

  AirSpiral tube

AirSpiral Heated Tube
 

  Conventional tube

Airspiral Conventional Tube
 

 

The heating spiral contains heater wire to warm the breathing gas inside the tube. The insulating spiral uses a bubble of warmed air around the breathing gas to shield it from the outside environment. Like a double-paned window, the inside and outside surfaces of the tube are physically separated, to reduce cooling and helps maximize the level of humidity remaining in the gas all the way to the patient. 

Features at a glance


Tubing Clip

Tubing clip

The molded clip attaches to clothes or bedding to allow positioning of the
tube during use.

Ergonomically Designed

Ergonomically designed

Molded grips at both ends of the tube assist connection and disconnection.

Integrated temperature sensor

Integrated temperature sensor

No external probes, cables or adaptors required.

 


An Airvo 2 tube that connects to both Optiflow™ and Optiflow Junior Interfaces.

 

Related Products-Interfaces


Optiflow+ Nasal Cannula

Optiflow+ Cannula

A nasal cannula designed with patient comfort and clinician confidence in mind.

Optiflow Junior Nasal Cannula

Optiflow Junior Cannula

Next generation care for our smallest Airvo customers.

Optiflow+ Tracheostomy Interface

Optiflow+ Tracheostomy Interface

An interface designed to deliver optimally humidified gas directly into the tracheostomy.

Resource Download List


Airvo 2 AirSpiral 

Brochure

 

AirSpiral Tube and Chamber Kit for Airvo

User Instruction
 

AirSpiral Tube for myAirvo

User Instruction
 

Top 7 tips for managing condensation or rain-out, i.e. achieving Optimal Humidity for your patients

AirSpiral™ is our latest innovation in humidity delivery and condensation control. We know that some environments are more challenging than others, so here are our top tips to help manage condensation (rain-out) should it occur.    
Every part of our Airvo™ humidifier system plays a role in delivering Optimal Humidity to your patients. So, for best performance, use only Fisher & Paykel Healthcare’s products on your Airvo or MR850™ humidifier.
  • Why?
    • For example, the Airvo humidity algorithm communicates with the heated breathing tube to power it and the tube provides temperature information (both within the room and inside the tube) back to the algorithm.
    • The algorithm also accounts for the key characteristics of the Optiflow™ interfaces, i.e. we know the geometry of the interfaces and the nature of the materials, via our Evaqua™ technology. So, we know how to minimize condensate and deliver Optimal Humidity to the patient, for each interface in our range.  
That way, if condensation does form it’ll drain back towards the water chamber, not the patient.
Don't cover the heated breathing tube with clothing, blankets, sheets or pillows. Use the tube clip provided to attach it to the top of the bed coverings and allow it to run freely (and uncovered) between the patient and the device.
In-built sensors help compensate for ambient conditions but you can help by checking the following:  
  • Is there a local source of cooling activated close to or blowing on the heated breathing tube, like a fan, air-conditioning unit, or air vent? 
    • If yes, are you able to remove or minimize the source, e.g. could a fan could be moved to the other side of the bed, away from the tube?
Here’s how:
  1. Disconnect the interface from the heated breathing tube.
  2. Drain the tube by lifting up the patient end of the tube.
  3. At higher flows it may be necessary to reduce the target flow rate to 30 L/min, or below, to ensure the water drains towards the chamber.
  • Please note: this will also reduce the level of humidity reaching the patient, so try the other tips first.


Product/Reorder Codes


 
Part No. Description Quantity
900PT561 AirSpiral tube and chamber kit for Airvo 2 10 in a box
900PT560 AirSpiral tube for Airvo 2 10 in a box
900PT560E AirSpiral tube for Airvo 2 Each/single

If you have an enquiry about our products, please provide the following information so a Fisher & Paykel Healthcare representative can contact you. For further details on how this information will be used, see below or go to our privacy statement.
Contact Details
Please select from the following options:*

Enter security code
 Security code
By submitting this form, you consent to Fisher & Paykel Healthcare storing your personal information to contact you about your enquiry. Your information will be collected and stored securely by Fisher & Paykel Healthcare Limited based in New Zealand and may be shared with the wider Fisher & Paykel Healthcare group as necessary to support your enquiry. We will not share, disclose or sell your information to third parties for marketing purposes. For full details on how we use and manage your personal information, how long we may retain this information for sales or marketing purposes, your rights to access, correct or delete your personal information, and how to contact us about your personal information, please see our privacy statement.

Want to receive updates?

Sign up to receive email notifications of the latest product and therapy information as well as upcoming events.
 

Sign up here