F&P myAIRVO™ 2 Humidified
High Flow
System

What is the myAIRVO 2 system?

Humidifier with integrated flow generator

The myAIRVO 2 device features a humidifier with integrated flow source that delivers high flows of air/oxygen mixtures to spontaneously breathing patients, through a variety of interfaces up to 60 L/min. The myAIRVO 2 with its wide range of accessories is an integrated system providing versatility, mobility and convenience.

myAIRVO 2 device - Key features

F&P AirSpiral^TM
heated breathing tube

Dual spiral heater-wires and an integrated temperature sensor. No separate temperature probes or heater-wire adapters required.

Learn more

Variety of F&P Optiflow^TM interfaces

The myAIRVO 2 system can be used with Optiflow nasal interfaces as well as direct-connect tracheostomy and mask interfaces.

Learn more

Controlled oxygen delivery (when required)

Oxygen from a concentrator or cylinder can be added. An in-built ultrasonic analyzer requires no calibration, service, or replacement.

AIRVO adjustable temperature and flow settings

Designed for simple setup, use and cleaning

Helpful on-screen animations assist with setup and troubleshooting.

Adjustable temperature
and flow settings

Three temperature settings (37, 34, 31 °C) help achieve comfort and compliance. The integrated flow generator delivers a wide range (2 - 60 L/min) for both pediatric and adult patients - no wall air supply is required.

Make a product enquiry below

Your local Fisher & Paykel Healthcare representative will arrange a visit to you and your team.

Product Enquiry

The new AirSpiral tube for myAIRVO 2 system

The new AirSpiral - 93%25 less condensate

Use AirSpiral breathing tubes
for less condensate.*

Less condensate may reduce interruptions to therapy.

* When compared with the 900PT501 and 900PT500 AIRVO tube in internal Fisher & Paykel Healthcare testing

myAIRVO 2 device - Instructional videos

myAIRVO 2 system
Introduction HC360

This introduction video to the myAIRVO 2 device with the HC360 reusable chamber describes what the myAIRVO system is, how it works, and the philosophy behind the use of an active heated humidifier to provide Optimised Humidity.

myAIRVO 2 system
Introduction MR290

This introduction video to the myAIRVO 2 device with the MR290 auto-fill chamber describes what the myAIRVO system is, how it works, and the philosophy behind the use of an active heated humidifier to provide Optimised Humidity.

myAIRVO 2 system
Setup HC360

This video is a step-by-step guide to setting up the myAIRVO 2 device with the HC360 reusable water chamber, and an introduction to our range of Optiflow interfaces.

myAIRVO 2 system
Setup MR290

This video is a step-by-step guide to setting up the myAIRVO 2 device with the MR290 auto-fill water chamber, and an introduction to our range of Optiflow interfaces.

myAIRVO 2 system
Use

This video guide shows how to operate the myAIRVO 2 device, including how to adjust key settings such as flow, temperature, and how to add supplemental oxygen (if required).

myAIRVO 2 system
Cleaning

This video demonstrates the daily and weekly cleaning of the myAIRVO 2 device.

Comfort and confidence for patients and clinicians

The leading-edge design of the Optiflow+ cannula originates from Fisher & Paykel Healthcare’s dedication to improve care and outcomes, giving clinicians confidence in the comfortable delivery of Humidified High Flow.

Learn more

Comfort and confidence for patients and clinicians

Learn more

myAIRVO 2 system - Related products

Optiflow™ + Tracheostomy Interface

Optiflow™Junior Nasal Cannula

F&P Optiflow™ + Nasal Cannula

F&P Optiflow™ + Mask Interface Adapter

Elderly lady receiving myAIRVO Nasal High Flow therapy

Nasal High Flow and COPD focused webinar

Learn more about myAIRVO system and Nasal High Flow.

Associate Professor Ulla Møller Weinreich speaks about her research "Humidified High Flow therapy for chronic COPD patients" in this Nasal High Flow and COPD focused webinar.

Listen to the webinar

myAIRVO and AIRVO
humidified high flow systems
across the care continuum

The AIRVO 2 family enables the transition of Optiflow therapy across critical, non-critical areas of the hospital and into the home. Piped air supply is unnecessary and flows can be delivered up to 60 L/min. Clinicians can control the maximum flow and fraction of inspired oxygen (Fi0₂) delivered by the device to suit their requirements in non-critical areas.

The AIRVO 2 family, with its wide range of accessories, provides versatility, mobility and convenience.

Learn more about AIRVO 2 device

A myAIRVO 2 in your pocket

Download the myAIRVO 2 system simulator app and have this great learning/teaching tool at your fingertips.
Use the app to:
• Learn how to use the myAIRVO 2 device
• Teach others how to use the myAIRVO 2 device quickly and easily
• Test your skills

Download the myAIRVO 2 humidified high flow system simulator app now, for free.

Nasal High Flow Product Codes

Part No.	Description	Quantity
PT100AN	myAIRVO 2 humidifier with integrated flow generator	1/each
MYAIRVOKIT1	AirSpiral tube and auto-fill chamber kit	1/each
900PT560	AirSpiral heated breathing tube	10/box
900PT561	AirSpiral heated breathing tube and chamber kit	10/box
900PT560E	AirSpiral heated breathing tube	1/each
900PT290E	MR290 auto-fill water chamber	1/each
HC360	HC360 reusable water chamber	1/each